Medium pine kit bed 1

Frame for raised bed

One-piece aluminium frame detail with fixing channel

Assembling one-piece frame into kit bed

Strong non-rusting frames for raised beds and kit beds

Standard Frames for existing raised beds

These are for those of you who have already got raised beds, HGR or other types, but need some decent frames that don't snap, blow away, buckle in high winds or rust in the wet.  

They are upright frames, allowing you access to the full surface area of your raised bed (if you have used curved frames in the past, you'll know that these can often make it difficult to grow crops along the edges of your bed).  In addition, they are lovely and smooth - no jagged edges to rip your netting or fleece covers. 

They measure 60cm above the bed, plus a further 10cm that slots into an aluminium channel fixed to either the inside or outside edge of your bed.  Fixing our frames into the actual body and the sides of your beds gives them great strength - they're really robust and will withstand very high winds.  They are made from 25mm (1 inch) aluminium tubing which has a wall thickness of 2mm (³/₁₆ inch). 

Please note that these frames come included as part of our kit bed + range.

YES! YOU CAN FIT THESE FRAMES TO YOUR EXISTING RAISED BEDS!

We make them in a range of widths.  Simply decide whether you want to attach the channel to the inside or outside walls of your bed,  then measure the interior or exterior width of the bed and choose the appropriate frame width from the products below. 

The frames have a decent amount of tolerance,  so for example a frame measuring 100cm wide will fit a bed from 97cm wide to 103cm wide. 

If the size of frame that you require is not shown below please go to our custom built frames page where we will be happy to quote you prices for taller, shorter, wider or narrower frames. 

Frames come with the aluminium channel that they slot into and all screws etc.